10
10.0
Jan 16, 2021
01/21
by
Scott Lapp (lappdog)
data
eye 10
favorite 0
comment 0
This is a trash bin for the BMW i3 that connects to the accessory slots in front of the middle console. I made it to work around the extra cup holder if you keep that in the middle slot. The accessory slot connector was made with 70% infill for strength. It took less than 2 hours to complete. The bin was made with 20% infill but took a whopping 18 hours to build. I wanted the bin to reach all the way to the floor so there was no stress on the connector. I could have put small feet under the bin...
Topics: trash_bin, Automotive, bmw_i3, automotive, thingiverse, trash-bin, trashcan, stl
4
4.0
Apr 13, 2021
04/21
by
Jean-Luc Guillemette (jlguil)
data
eye 4
favorite 0
comment 0
As my first attempt of fixing my garbage bin (http://www.thingiverse.com/thing:794901) resulted in "the bin's cover gone in the truck" I designed a new fix using 3 printed hinges, 1/2 plywood 1/2 pex pipe Some screws. This desing had been tested before it's been posted.
Topics: thingiverse, Replacement Parts, stl, trash_bucket, trash_bin, trash-bin, garbage
11
11
Jan 12, 2021
01/21
by
Johnathan Bamber (bamberjp)
data
eye 11
favorite 0
comment 0
A common trash bin.
Topics: trash-bin, thingiverse, Household, stl
2
2.0
May 1, 2021
05/21
by
Silas wolf (AlphaWolf112)
data
eye 2
favorite 0
comment 0
.
Topics: stl, thingiverse, Other, trash-bin
8
8.0
Jun 20, 2021
06/21
by
Jett Johnson (Jett0312)
data
eye 8
favorite 0
comment 0
This is something i thought was great for desk organization. Hope you like it.
Topics: Household, Trash, thingiverse, trash_bin, stl, trash_bag, Trashcan, trash_can, trash-bin
3
3.0
Jan 19, 2022
01/22
by
Ryan Fordice (noxbit)
data
eye 3
favorite 0
comment 0
A wall mounted scrap bin for all the misc scrap pieces from your printer. Comes with two recycle symbols ABS and PLA. It's thicker than it probably needs to be so it will use close to half a spool. 200mm tall so make sure your printer can go that high.
Topics: trash-bin, thingiverse, Organization, scrap, stl
9
9.0
Apr 26, 2021
04/21
by
N Sarsanedas (antaviana)
data
eye 9
favorite 0
comment 0
Support for trash bin
Topics: thingiverse, stl, trash-bin, support, Organization
4
4.0
Mar 15, 2021
03/21
by
to kouiji (n_k)
data
eye 4
favorite 0
comment 0
Trash side holder ゴミ箱 サイドホルダー アスベル ゴミ箱 27L
Topics: stl, trash-bin, thingiverse, 3D Printers
2
2.0
Apr 20, 2022
04/22
by
Cody Midtun (WGA_CM)
data
eye 2
favorite 0
comment 0
This is the O.G.T.A.D. trash bin the the O.G.T.A.D. designs connect to.
Topics: thingiverse, O.G.T.A.D., Engineering, Trash Bin, stl
12
12
Jan 19, 2021
01/21
by
Jörg S (Jacks-Filament)
data
eye 12
favorite 0
comment 0
Hi, i needed a small cool looking bin for the bathroom. I cropped of the head, made a hole in it and added a radius chamfer to the inner edge. Hope you like it.
Topics: trash_bin, thingiverse, receptacle, Sculptures, futurama, trash-bin, jar, container, bender, bin,...
3
3.0
May 1, 2021
05/21
by
Jonathan Sanchez (Onewingedseraph)
data
eye 3
favorite 0
comment 0
Filament bin for the filament bin holder file on thingiverse
Topics: stl, thingiverse, 3D Printing, trash-bin
6
6.0
Mar 17, 2021
03/21
by
Leonardo Galardi (leogala)
data
eye 6
favorite 0
comment 0
Supports to repair a broken lid of an automatic trash bin. Best printed in PETG. See also https://www.youtube.com/watch?v=GNX55U-AQ-I for further details.
Topics: Replacement Parts, fix, trash lid, trash_can, stl, repair, automatic trash bin, thingiverse,...
0
0.0
Aug 16, 2022
08/22
by
glassy (glassy)
data
eye 0
favorite 0
comment 0
Have got two plastic trash-bins with top covers recently. I don't use top covers but thought they might be useful in the future. So here is a hook to hang the cover on the thrash-bin side. - If you found my design useful or inspiring and would like to buy me a cup of espresso you are welcome to tip me: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=U25V96GZNVL3N&source=url Thank you!
Topics: stl, trash-bin, Household, hook, cover, thingiverse
8
8.0
Jan 17, 2021
01/21
by
Firas Helou (firashelou)
data
eye 8
favorite 0
comment 0
A Bin that can be used for trash or else, it is designed to be printed with wood filled PLA, it can be printed with other material though and then painted with wood paint.
Topics: thingiverse, cover, trash-bin, PLA, Containers, wood, stl
4
4.0
Mar 21, 2021
03/21
by
Jean-Luc Guillemette (jlguil)
data
eye 4
favorite 0
comment 0
This is remplacement part for trash bin.
Topics: stl, Replacement Parts, trash-bin, thingiverse, Garbage, trash
4
4.0
Jan 5, 2021
01/21
by
Victor BARRERE (VicOnTheBeach)
data
eye 4
favorite 0
comment 0
Mount the case under the printer work space
Topics: 3D Printing, bin, stl, thingiverse, filament, trash-bin
3
3.0
Jun 7, 2021
06/21
by
bene vo (s4lfish)
data
eye 3
favorite 0
comment 0
I designed and printed this, to mount a trash bin to my enclosure (old closet). Dimensions of the bin are: * Height: 14cm * Width: 11cm * depth: 7cm
Topics: trash, thingiverse, DIY, stl, trash-bin, trashcan, bin
3
3.0
Jun 11, 2021
06/21
by
Stommes (Stumpy_56)
data
eye 3
favorite 0
comment 0
Clip to hang any grocery bag from a 1' wide metal trash bin. Everyone who owns a metal trash bin knows the struggle of using a plastic grocery bag for the bin and the bag falling. Now you can print two of these bad boys and solve that annoying everyday problem.
Topics: Gadgets, thingiverse, struggle, trash-bin, trash_can, stl
4
4.0
Mar 15, 2021
03/21
by
Bruce Sherwood (MelvinOnline)
data
eye 4
favorite 0
comment 0
This is a very simple Lid I designed for a plastic gallon jar my wife converted to be a bedside trash bin. It keeps our dogs from rooting around inside, yet you don't have to open the lid to put something in. I have attached the Fusion 360 file so you can adjust as needed. There is only one 'sketch' layer, and the rest are just extrusions or a single pattern command. Very simple to understand, and manipulate into whatever your size needs are. This is a great simple file to explore Fusion360...
Topics: trash-bin, Office, thingiverse, lid, stl, fusion360, conversion
2
2.0
Mar 10, 2021
03/21
by
Keith Chong (keithchong)
data
eye 2
favorite 0
comment 0
HK Trash Bin 2016 version in 1:12 scale. 1:12 model, good to play with S.H.Figure and others 1:12 scale toys. 香港垃圾筒 2016 年版本，1:12 比例。 兩個版本，一個上身有米缶，一個上身無米缶。 1:12 可以同 S.H.Figure、胡廸等公仔一齊玩～ — I’m a HONG KONG MAKER, Thanks, Enjoy! Follow me on instagram https://www.instagram.com/fullydimension/ and visitet my YouTube Channel https://bit.ly/Fully-youtube/ (in cantonese only)
Topics: trash bin, system84, stl, thingiverse, Trashcan, Trash, Toys & Games
3
3.0
Jan 5, 2021
01/21
by
Vl Ka (bitepix)
data
eye 3
favorite 0
comment 0
change door wide parameter for your.
Topics: stl, thingiverse, Kitchen & Dining, trash_bag, Trash, trash-bin
4
4.0
Jun 11, 2021
06/21
by
Ares Black (t3chm4g3)
data
eye 4
favorite 0
comment 0
Trash bin lid pin for bins used in Bucharest, Romania.
Topics: thingiverse, trash-bin, Outdoor & Garden, pin, wheelie_bins, stl
4
4.0
Mar 19, 2021
03/21
by
Sebastian Fabisz (lazymaniac)
data
eye 4
favorite 0
comment 0
Trash can designed for 3d printing leftovers like failed prints, brims, skirts etc. Simple design, and should be easily sliced. Dimensions in .stl file name. Wall and bottom thickness: 2mm If you need other dimensions please let me know :) Happy printing :)
Topics: Trashcan, trash-bin, Containers, trash_can, thingiverse, Trash, stl
10
10.0
Jan 17, 2021
01/21
by
Tomas Kruger (TomasKruger)
data
eye 10
favorite 0
comment 0
Great idea by Ekdahl! - I felt a need to bevel the edges, so that debris won't accumulate there. - Chamfered the bottom of it, so that it will be easier to clean out and insert. - I modified the hooks, to be stronger and better looking. - The hook modification was also to allow for printing sideways. This makes the hooks even stronger, eliminates the need for printing support, and best of all; the print lines are now in the trash bin insertion direction, which makes it slide in very nicely. In...
Topics: K8400_Velleman, K8400, trash_bin, 3D Printer Accessories, trash_can, Vertex_K8400, Trashcan,...
13
13
Jan 11, 2021
01/21
by
Kevin Hajek (kdrummer)
data
eye 13
favorite 0
comment 0
This remix was inspired by Occasionally_Inspired's paper bag rim which helps keep open a paper bag so you can use it for whatever you like. I like using this for recycling, dry compostable items, and collecting shredded paper since my recycler only collects this if it's contained in a labeled paper bag. v2 Notes: I realized there was an error in the model which left open faces to be poorly interpreted by the MakerBot slicing engine which wasn't apparent in Cura. I've updated the model...
Topics: compost_bin, thingiverse, stl, trash_bin, paper_bag, composting, Organization
3
3.0
Jun 20, 2021
06/21
by
roy levy (roy_levy)
data
eye 3
favorite 0
comment 0
my trash lid-connector opener has been broken, so I created a new one. its a kitchen bin of 30 liter. for faster speed I used 0.8mm nozzle printed in CR-10 V2 infill 75% so the resolution that i use is 0.4mm no raft/support PLA 56 min, 22 gram
Topics: Trash, thingiverse, bin, stl, lid, Kitchen & Dining, connector, trash-bin
2
2.0
Nov 30, 2021
11/21
by
Peter Mandaville (clipper024)
data
eye 2
favorite 0
comment 0
Trash bin I designed for the Fiat 500. Mounts in the rear cupholders, taking them out of commission but gaining you somewhere to throw stuff away. Ours is a 2012 model year and I'll update once I learn if it fits in other model years.
Topics: trash-bin, Trashcan, thingiverse, fiat, fiat_500, Trash, stl, Automotive
0
0.0
Aug 14, 2022
08/22
by
Jay Ducharme (ThingiJay)
data
eye 0
favorite 0
comment 0
This is a recreation of the trash bin that was at Mountain Park in Holyoke, MA. It looked like a circus wagon with a lion inside. The lion had an open mouth. There was a vacuum inside and when you placed your trash in the lion's mouth, it would get sucked inside. The roof is a separate piece, as are the wheels. I adapted the lion head from Tevons: https://www.thingiverse.com/thing:2429239 This was designed for my Mountain Park model: http://www.karenandjay.com/mtpark/mpmodel/mpmodel.html
Topics: trash_can, Amusement_Park, Buildings & Structures, stl, thingiverse, trash-bin
3
3.0
Mar 22, 2021
03/21
by
(AlucardWulf)
data
eye 3
favorite 0
comment 0
Simple trash bin for the leftovers from 3Dprinting. I mount it to the table plate on wich my 3D printer stands. can swipe the leftovers easily into it. As always feel free to ask in German or English
Topics: stl, 3D Printer Accessories, wall_mount, trash-bin, thingiverse, Trashcan
1
1.0
Apr 20, 2022
04/22
by
Stephen Tanner (SuRgE_SEAL)
data
eye 1
favorite 0
comment 0
This is basically a remix of https://www.thingiverse.com/thing:4710941/files with the purpose of having a flat edge instead of a rounded edge which is perfect for wedging it into places and holding it down with a semi-heavy object.
Topics: thingiverse, Trash, 3D Printing, trash-bin, trash_can, stl, Trashcan
2
2.0
Apr 20, 2022
04/22
by
Airboost Flip (Airboost)
data
eye 2
favorite 0
comment 0
Une poubelle pour imprimantes ender 3. Récolte les déchets de bordure et les ratés au démarrage :o) Le fond est à symétriser dans votre slicer pour obtenir l'autre coté!
Topics: thingiverse, 3D Printer Accessories, poubelle, trash-bin, creality_ender_3, stl
7
7.0
Jan 20, 2021
01/21
by
Josh Zhou (j0z)
data
eye 7
favorite 0
comment 0
This is a trash can I made. The lid joint can be directly printed, and is designed to pop into the divots in the main bin. The axle should be printed in two parts (part1 and part2) and glued together after being fit into the hole in the bin. STL's attached are in mm, but of course you can scale up/down to meet your needs. Make sure to like and post a make!
Topics: Art, thingiverse, Ultrasonic_Sensor, trash can, trash-bin, trash, trashcan, stl
8
8.0
Apr 17, 2021
04/21
by
Rudy K (KR3OC)
data
eye 8
favorite 0
comment 0
I drilled a 3/32" hole for the #6 Hair Pin Cotter Pin and I put 0mm separation distance on the raft so it fused to the part. This makes the end a little wider. The last picture is an original hinge pin.
Topics: Trashcan, trash-bin, Replacement Parts, thingiverse, trash_can, stl, garbage_can
3
3.0
Apr 24, 2021
04/21
by
Zeru Dragon (zerubruh)
data
eye 3
favorite 0
comment 0
This is an easy made trash bin. I wanted to make trash bins for my filament for reclycling purposes but its also great for a normal trash bin. They are strong enough to hold a load with minimal infill and material. That is why I made the top thinner than the bottom. Soon I will put optional upgrades for stacking purposes or a wall holder.
Topics: Organization, thingiverse, stl, trash-bin, trash_bag, easy_print, filament, easy, Trash
6
6.0
Mar 2, 2021
03/21
by
Blair Ross (amnross)
data
eye 6
favorite 0
comment 0
This thing is just a simple trash can for the bathroom sink. The ring and the indent is to hold small trash bags. I've been using the dog walk pickup bags.
Topics: Trashcan, trash-bin, bathroom_Organizer, Trash, bathroom_accessories, Containers, thingiverse, stl,...
5
5.0
Jan 3, 2021
01/21
by
Ben Teggemann (BensHacks)
data
eye 5
favorite 0
comment 0
I found it quite annoying to handle the wast from 3d printing. So I designed these rings to mount an jar underneath my printing table. The ring can be mounted flush with the desktop. So wast can be pushed into the jar. The teeth at the inside are catching fine strings. The jar can be remove for clearing easily. The rings are glued into an 67mm round hole with an small chamfer. Wood glue is fine even though it dose not bind to the petg I used. I provided different versions for different jar...
Topics: garbage_can, garbage_disposal, stl, dumper, trash bin, thingiverse, 3D Printer Accessories
3
3.0
Apr 30, 2021
04/21
by
Gerd Müller (gmueller2000)
data
eye 3
favorite 0
comment 0
Just a simple clip for the bags of a Curver Duo trash can.
Topics: stl, trash_bag, trash_can, Kitchen & Dining, thingiverse, Trash, Trashcan, trash-bin
9
9.0
Apr 28, 2021
04/21
by
Conny G (conny_g)
data
eye 9
favorite 0
comment 0
Waste bin for bathroom cabinet door, 18x18cm high/wide, 5.5cm in depth. With hanger so you can empty or clean in dish washer - if printed in a material with appropriate heat resistance. Printed it in ColorFabb nGen which is stable until 80 degrees. Stick holder to door with Tesa Power Strips and you can remove any time. The pin for the hinge is not printable. The 2.8mm part is ok, but the last part with the cut is too small. You can simply use the stick of a cotton bud, though. Designed in...
Topics: Bathroom, trash, thingiverse, waste, bathroom, stl, trash_can, waste_bin, trash_bin
8
8.0
Jan 17, 2021
01/21
by
Denis Lukanov (digiTALker)
data
eye 8
favorite 0
comment 0
There is a two kind of options. U may print separated parts and use clue after. I like to use Pet-G for this model.
Topics: Trash, stl, plastic_bag, thingiverse, trash_bag, Office, trash-bin, garbage_can
4
4.0
Mar 18, 2021
03/21
by
Denis Shelema (DenisShelema)
data
eye 4
favorite 0
comment 0
Small garbage bin with lid. Size about 170 x 120 x 185 mm (6.7 x 4.7 x 7 inches). You can choose from 3 variants: 1) Regular (desktop) version; 2) Wall mounted, mount on left side; 2) Wall mounted, mount on right side. Two zinc coated Ø2 mm nails used as hinges axes. Magnets size is Ø5 x 2 mm (they are optional). Two DIN 7982 M2.9 screws used for wall mount.
Topics: trash can, trash bin, stl, thingiverse, Household, garbage bin, wall mounted, garbage can
3
3.0
Jan 3, 2021
01/21
by
Bryce Lowe (brycelowe)
data
eye 3
favorite 0
comment 0
Designed and printed a spacer to keep our trashcan from continually being bushed into the wall leaving marks. Why not make it fun, so I incorporated a nod to SpaceX by mimicking the grid fin look. Printed and applied with double sided tape.
Topics: stl, spacex, Trash, trash_can, grid_fin, Kitchen & Dining, thingiverse, Garbage, trash-bin
3
3.0
Jun 11, 2021
06/21
by
Pavel Lorenc (pavlorenc)
data
eye 3
favorite 0
comment 0
GoPro Adapter for absolute amazing Clever Holder (https://www.thingiverse.com/thing:4845444).
Topics: holder, car, bin, Tool Holders & Boxes, thingiverse, Trash, trash-bin, trash_bag, stl
2
2.0
Sep 13, 2021
09/21
by
Joshua Johnston (JLJ0078)
data
eye 2
favorite 0
comment 0
I created this little trash can to throw away filament leavings from my printer. It's designed to be two layers thick. I have not tried it running vase mode, but I think it would work great.
Topics: stl, Trash, thingiverse, garbage_can, rubbish_bin, trash_can, trash-bin, Containers, Garbage
8
8.0
Jun 11, 2021
06/21
by
(SE_2018)
data
eye 8
favorite 0
comment 0
Summary This is the newer version of the rubbish bin, Part No: 92926
Topics: 92926, lego bin, rubbish_bin, thingiverse, lego, lego trash bin, tons of bins, stl
0
0.0
Aug 15, 2022
08/22
by
R. Sharpe II (SuPpaToXiK)
data
eye 0
favorite 0
comment 0
Just a simple stackable trash container i couldn't find one so i made one
Topics: trash_can, Trashcan, Trash, Containers, stackable, stl, trash-bin, thingiverse, container, bin,...
3
3.0
Mar 13, 2021
03/21
by
Frederic (Fr3d3r1c)
data
eye 3
favorite 0
comment 0
I printed some time ago a trash can to help disposing filament scraps. It was well designed with a star-shaped lid to help long filament wires to get in and prevent them to get out. But there was a problem when the trash was half full: the filaments pushed the lid out. So I created myself another one, with a screwable lid. I like the style of the old street's trash can so I made mine like that.
Topics: 3D Printer Accessories, thingiverse, trash_can, Trash, filament, trash-bin, stl, Trashcan,...
0
0.0
Aug 14, 2022
08/22
by
Cengiz Kalaycıoğlu (cengolojik)
data
eye 0
favorite 0
comment 0
I printed the body as a vase mod. But it maybe weakness for the body, because when I finished print and I take th body, I filling water to inside and it seperate from some weak layers. So be careful. Then I printed the cover as normal mod. after that I printed handles, and I stick to the body with glue. But I must say it was difficult. Maybe this design should improve for better parts. Thank you for your interest.
Topics: trash_can, Trashcan, garbage_bin, Garbage, garbage_can, stl, thingiverse, bin, trash-bin,...
2
2.0
Jul 22, 2021
07/21
by
Megan Sheppard (LadySapphy)
data
eye 2
favorite 0
comment 0
Just a quick set of signs for our matching trash and recycle bins. The Recycle does not look the grates do to a printing error on my part. The printer turned off the heaters and cooled all the way off waiting on me to remember to change the filament.
Topics: Trash, trash_can, trash-bin, Trashcan, stl, recycle, Kitchen & Dining, thingiverse, recycling,...
3
3.0
Mar 18, 2021
03/21
by
Thorben G. (freak23)
data
eye 3
favorite 0
comment 0
I needed a little trash can to put beside my printer, so I designed this one. Mine is with a text on it as you can see on the picture, but the uploaded .STL file is without text. The box is 100mm x 100mm x 50mm. You can use it also as storage box, etc. ---------------------------------------------------------------------------------------------------------------------------- Ich wollte eine kleine Müllbox für meinen Drucker haben, also habe ich mir schnell eine selbst konstruiert und...
Topics: Trashcan, trash-bin, trash_can, Storage_Box, thingiverse, 3d_printer, box, 3D Printer Accessories,...
4
4.0
Mar 15, 2021
03/21
by
MATHIS LEFEBVRE (MATLEF)
data
eye 4
favorite 0
comment 0
Hello, Here is a detachable bin from its support which hangs on your desk. The dimensions of the bin are 18 x 18 x 20 cm. You can change the scale of the pieces being careful with the "desk hanger" so that it is still functional. There are several versions of bin with 3 or 4 arms, but also with the "bin support" which can be printed in 2 times with "bin support with extension" and "extension 1 and 2". If you have any problems, don't hesitate to contact...
Topics: trash-bin, thingiverse, chambre, poubelle, trashcan, bureau, organization, rangement, trash, bin,...
